3D Printed T-800 Endoskeleton · Part 8 of 10

3D Printed T-800 Endoskeleton Part 8

Focusing on the arms and lower body. Remove old paint job with acetone and remove layer lines with epoxy putty.

I repeated the process for the arms and lower body:

  • Remove old paint with acetone
  • Apply putty and sand
  • Rescribe panel lines and details

Gallery 10 photos

Photo 1 of 10Photo 2 of 10Photo 3 of 10Photo 4 of 10Photo 5 of 10Photo 6 of 10Photo 7 of 10Photo 8 of 10Photo 9 of 10Photo 10 of 10